Victron M8 Eyelet Connector (w/ 30A ATO Fuse) (Suits IP65 Battery Charger)
Quick-Release DC Cable with Weather-Resistant 30A Inline Fuse
DESCRIPTION
Permanent and Secure Connections for Your IP65 Charger
Maintaining the health of your battery systems requires regular and reliable charging. The Victron M8 Eyelet Connector with 30A ATO Fuse provides a permanent, hardwired connection directly to your battery terminals, streamlining the process of hooking up your Blue Smart IP65 battery charger. By eliminating the need to repeatedly attach and remove traditional alligator clips, this accessory significantly reduces the time and effort required to keep your batteries at optimal capacity.
Optimised for Difficult-to-Reach Batteries
Many deep cycle battery banks, marine electrical setups, and automotive auxiliary batteries are installed in confined or awkward spaces. Accessing these terminals manually every time a top-up is needed can be frustrating and increases the risk of accidental short circuits. Once installed, the M8 eyelet terminals remain securely bolted to your battery posts. The attached quick-release connector can then be routed to an easily accessible location, allowing you to plug in your Victron IP65 charger in seconds. This solution is exceptionally valuable for caravan systems, tightly packed engine bays, and enclosed battery boxes where physical space is at a premium.
Integrated Safety and Robust Construction
Electrical safety is a critical factor in any charging application. This connector accessory is equipped with an integrated 30A ATO inline fuse, which provides essential overcurrent protection for your battery and connected equipment. The fuse holder features a durable, protective rubber cover to defend against dust and moisture ingress, preserving the integrity of the electrical connection in demanding environments.
The heavy-duty red and black leads are highly visible and clearly colour-coded, minimising the risk of reverse polarity during the initial installation. With an M8 internal diameter, the eyelets are specifically sized to accommodate standard 8mm battery terminal studs, ensuring a secure, high-contact surface area for efficient current transfer.
Key Features and Benefits
- M8 (8mm) eyelet terminals: Sized for standard battery posts, delivering a stable and secure mechanical connection.
- Quick-release plug: Mates seamlessly with the Victron Blue Smart IP65 Charger series for rapid, tool-free connection.
- 30A ATO inline fuse: Offers robust overcurrent protection, safeguarding your battery from unexpected electrical faults.
- Protective rubber fuse cover: Shields the fuse assembly from environmental contaminants, dirt, and moisture.
- Clear colour-coding: Red positive and black negative leads ensure correct polarity alignment during setup.
Enhance Your Maintenance Routine
Relying on generic or makeshift wiring solutions can introduce electrical resistance, voltage drops, and potential safety hazards. By using the official Victron accessory engineered specifically for your charger, you eliminate compatibility concerns and ensure the charging cycle operates at maximum efficiency. Whether you are maintaining a seasonal recreational vehicle, a marine house battery, or a standby backup system, this connector ensures your routine charging process is efficient, safe, and highly repeatable.
Upgrade Your Charging Setup
Simplify your battery maintenance and improve the safety of your physical connections. Add the Victron M8 Eyelet Connector to your power system toolkit today to experience fast, secure, and reliable charging for your deep cycle or starter batteries.
SKU: VIC-BPC900110014
SPECIFICATIONS
Specifications
| Part number | BPC900110014 |
|---|---|
| Battery connection | M8 ring terminals |
| Fuse type | Inline ATO fuse |
| Fuse included | 30A fuse included |
| Accessory type | Interchangeable DC power cable battery connection type |
| Compatibility | Blue Smart IP65 Charger with DC connector |
| SKU: | VIC-BPC900110014 |
| Barcode: | 8719076041665 |
| Model #: | BPC900110014 |
| MPN: | BPC900110014 |
WARRANTY
Victron Energy Limited Warranty Policy
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.
During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like: • Reverse of battery polarity. • Inadequate connection. • Mechanical shock or deformation. • Contact with liquid or oxidation by condensation. • Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...). • Breakage or damage due to lightning. • Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening. • For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.
Life Support Policy As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.
Warranty on Repairs The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.
Transport It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.
For Australia only Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Exotronic provides high-quality products and solutions tailored for B2B and commercial customers, including commercial businesses, caravan manufacturers, marine electricians, OEMs, as well as emergency services, and more.



