Victron 12/24V 50A SmartSolar MPPT 100/50 Bluetooth Solar Charge Controller

Experience unparalleled efficiency and performance with the Victron Energy 50A MPPT Solar Charge Controller, a cutting-edge solution in solar energy management from a renowned global leader. This device is designed to optimize your solar energy system's performance, making it an indispensable tool for anyone looking to enhance their renewable energy setup.

Integrated Bluetooth Smart Technology

Enjoy the convenience of wireless system management with the built-in Bluetooth Smart feature. This enables effortless device setup, monitoring, updates, and synchronization directly from your smartphone, enriching your solar energy management experience with ease and efficiency.

VE.Direct Wired Data Connection

Ensure robust data connectivity with VE.Direct, facilitating a wired connection to Cerbo GX and other GX products, and personal computers. This feature enhances system integration and performance, making your solar energy system more cohesive and efficient.

Ultra-fast MPPT for Maximum Energy Harvest

With Victron Energy's ultra-fast Maximum Power Point Tracking (MPPT) technology, you can boost your energy harvest by up to 30% over traditional PWM controllers and by up to 10% over slower MPPT controllers. This technology is especially beneficial under varying light conditions, ensuring optimal energy capture even on cloudy days.

Innovative Maximum Power Point Detection

The innovative BlueSolar algorithm excels in scenarios with partial shading, securing the maximum energy harvest by locking onto the optimal MPP. This advanced approach prevents the system from settling on a less efficient MPP, which can occur with conventional MPPT technologies.

Exceptional Conversion Efficiency

Achieve superior conversion efficiency with a maximum rate exceeding 98%, coupled with full output current capability up to 40°C (104°F). This fanless Solar Charge Controller not only simplifies your system design but also ensures top-notch efficiency without the need for additional cooling.

Versatile Charge Algorithm

Tailor your charging process with a fully programmable charge algorithm and eight pre-programmed algorithms, easily selectable via a rotary switch. This versatility allows for a customized and efficient solar charging experience, tailored to your specific needs and battery type.

Robust Electronic Protection

The Victron Solar Charge Controller is equipped with comprehensive protective features, including over-temperature protection, power derating at high temperatures, and multiple circuit protection measures. These safeguards ensure your solar energy system's longevity and reliability.

Accurate Internal Temperature Sensor

Benefit from precise charging adjustments with the built-in internal temperature sensor, which compensates absorption and float charge voltages based on temperature variations. This ensures your batteries are charged efficiently and accurately, optimizing performance and lifespan.

Bluetooth-enabled External Battery Voltage and Temperature Sensing

Expand your control and monitoring capabilities with optional Smart Battery Sense or a BMV-712 Smart Battery Monitor. These accessories provide real-time battery voltage and temperature data to your SmartSolar Charge Controllers, enhancing system management and performance.

Advanced Charging Features of Victron Energy's MPPT Solar Charge Controller

Victron's sophisticated 3-stage charging process includes Bulk, Absorption, and Float stages, ensuring your batteries are charged efficiently and safely. The adaptive charging algorithm adjusts the Absorption stage duration based on the battery's discharge level, while the absence of a storage stage means charging stops at night, conserving energy and protecting your batteries.

The VictronConnect App offers further customization with eight pre-set charge algorithms or a fully programmable charge algorithm, allowing for precise control over charge voltages, stage duration, and current. Additionally, for certain lead-acid batteries, an equalization charge can be activated to balance cell voltages, further enhancing battery health and longevity.

Elevate your solar energy system with the Victron 12/24V 50A SmartSolar MPPT 100/50 Bluetooth Solar Charge Controller for a future-proof, efficient, and user-friendly solar charging experience.

Victron Energy Limited Warranty Policy


Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.


During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.


This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.


Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.


Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.


Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.


As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.


Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.


Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.


Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.


For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specifications

SmartSolar Charge Controller MPPT 100/50
Battery voltage 12/24 V Auto Select
Rated charge current 50 A
Nominal PV power, 12 V (1a,b) 700 W
Nominal PV power, 24 V (1a,b) 1400 W
Maximum PV open circuit voltage 100 V
Max. PV short circuit current (2) 60 A
Maximum efficiency 98 %
Self-consumption 12 V: 30 mA, 24 V: 20 mA
Charge voltage 'absorption' Default setting: 14,4 V / 28,8 V (adjustable)
Charge voltage 'float' Default setting: 13,8 V / 27,6 V (adjustable)
Charge algorithm multi-stage adaptive
Temperature compensation -16 mV / °C resp. - 32 mV / °C
Protection PV reverse polarity, Output short circuit, Over temperature
Operating temperature -30 to +60 °C (full rated output up to 40 °C)
Humidity 95 %, non-condensing
Data communication port VE.Direct
Enclosure Colour Blue (RAL 5012)
Power terminals 16 mm² / AWG6
Protection category IP43 (electronic components), IP22 (connection area)
Weight 1,3 kg
Dimensions (h x w x d) 130 x 186 x 70 mm
Safety Standards EN/IEC 62109- 1, UL 1741, CSA C22.2
Stored Trends Data Battery voltage, current and temperature, as well as load output current, PV voltage and PV current.
Number of days trends data is stored 46

Notes:
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1 V.

2A PV array with a higher short circuit current may damage the controller.