Victron Smart Battery Protect 12/24V-100A: Enhanced Power Management with Bluetooth Connectivity

Bluetooth-Enabled for Superior Control

The Victron Smart Battery Protect 12/24V-100A comes equipped with Bluetooth functionality, offering advanced, wireless control and monitoring of your battery system. This feature ensures convenient and efficient management, making it ideal for modern vehicle and marine systems.

Optimal Battery Life Preservation

Designed to extend the lifespan of your battery, the Victron Smart Battery Protect 12/24V-100A is crucial in preventing complete discharge. It smartly disconnects non-essential loads, such as lighting or refrigeration systems, before they can fully deplete your battery or compromise its ability to start engines.

Safe Uni-Directional Current Management

This unit is uniquely engineered to handle current in one direction, whether to a load or from a charger. This provides robust over-voltage protection and ensures the safety of your sensitive onboard electronics.

Smart Voltage Detection and Easy Configuration

Automatically detecting system voltages of either 12V or 24V, the Smart Battery Protect integrates seamlessly into various electrical setups. Its Bluetooth-enabled interface simplifies setting engagement and disengagement voltages, displayed clearly for easy reference.

Lithium Battery Compatibility and Special Modes

With a specific setting for Li-ion batteries, this device can be managed via the VE.Bus BMS and serves as an effective charge interrupter, ensuring optimal battery health and longevity.

Energy-Efficient Operation

Its ultra-low power consumption is especially advantageous in conserving energy, critical in Li-ion battery setups after low voltage shutdowns.

Comprehensive Over-Voltage and Spark-Free Safety

Equipped with MOSFET switches, the Victron Smart Battery Protect offers dependable over-voltage protection and spark-free operation, enhancing the safety of your vehicle or marine system.

Remote Operation Flexibility

The added convenience of Bluetooth allows for remote control capabilities, enabling you to switch various devices on or off from a distance, ideal for managing external lights or electronic gadgets.

Advanced Alarm and Power Management

Its smart alarm system and efficient load management capabilities ensure uninterrupted power supply, preventing false alarms and managing power disconnects and reconnects with intelligence.

Select the Victron Smart Battery Protect 12/24V-100A for a top-tier battery management solution in your vehicle or marine system, where advanced control, efficiency, and connectivity are essential.

Victron Energy Limited Warranty Policy

Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.

During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.

This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.

Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.

Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.

Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.

As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.

Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.

It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.

If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.

For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


Model SPB 100
Maximum continuous load current* 100 A
Peak current (during 30 seconds) 600 A
Operating voltage range 6 –35 V
BLE On When on: 1.4 mA
When off or low voltage shutdown: 0.9 mA
Current consumption BLE Off When on: 1.2 mA
When off or low voltage shutdown: 0.7 mA
Alarm output delay 12 seconds
Maximum load on alarm output 50 mA (short circuit proof)
Load disconnect delay 90 seconds (immediate if triggered by the VE.Bus BMS)
Load reconnect delay 30 seconds
Default thresholds Disengage: 10.5 V or 21 V
Engage: 12 V or 24 V
Operating temperature range Full load: -40°C to +40°C (up to 60% of nominal load at 50°C)
IP rating Electronics: IP67 (potted)
Connections: IP00
Connection M8
Mounting Torque 9 Nm
Weight 0.5 kg
0.6 lbs
Dimensions (hxwxd) 61 x 41 x 164 mm
2.4 x 1.6 x 6.5 inch

* The BatteryProtect is not designed for reverse currents from charging sources