Maximize Solar Performance with Victron BlueSolar 150/35 MPPT Charge Controller

Important Note about BlueSolar (Non-Bluetooth Range)

For Bluetooth connectivity, please explore our SmartSolar range which includes built-in Bluetooth support, ideal for wireless monitoring and programming. If Bluetooth is required using the BlueSolar range, a VE.Direct to Bluetooth Dongle is required, purchased separately. 

Exceptional Energy Harvest with Advanced MPPT Technology

Unlock superior energy harvesting with the Victron BlueSolar 150/35 MPPT Controller, even under clouded skies. Benefit from up to 30% increased energy compared to PWM controllers and outperform slower MPPT models by up to 10%. This ultra-fast tracking technology ensures that you get the most out of your solar panels at all times.

Optimal Energy with Intelligent Shading Response

Experience the advanced Maximum Power Point Detection of the BlueSolar 150/35, which adeptly handles partial shading. Unlike conventional systems that may settle for less efficient power points, our innovative algorithm seeks out the optimum MPP, ensuring you harness maximum energy and enhance your system's yield.

Peak Conversion Efficiency

Without a Fan Enjoy more than 98% efficiency with the BlueSolar 150/35 — a fanless design that delivers full power output up to 40°C (104°F). With outstanding conversion efficiency, your solar energy system will operate smoothly and reliably.

Customizable Charging for Every Need

Tailor your solar charging with the BlueSolar's flexible charge algorithm. Choose from eight pre-set modes or customize your settings via our software for a perfectly adjusted charge algorithm that fits your specific energy requirements.

Comprehensive Electronic Protection

Your system is safeguarded with extensive electronic protection features, including over-temperature protection, PV short circuit, reverse polarity protection, and more. This ensures long-term reliability and safety for your solar energy setup.

Precision Charging with Temperature Compensation

The built-in temperature sensor in the BlueSolar 150/35 adjusts charging for maximum efficiency, accounting for environmental temperature variations, thus prolonging battery life and performance.

Take the leap towards efficient solar charging today with the Victron BlueSolar MPPT Solar Controller and harness the full potential of the sun's power

Victron Energy Limited Warranty Policy


Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.


During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.


This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.


Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.


Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.


Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.


As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.


Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.


Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.


Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.


For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specifications

Model BlueSolar MPPT 150/35 BlueSolar MPPT 150/45
Battery Voltage 12 / 24 / 48V Auto Select (software tool needed for 36V) 12 / 24 / 48V Auto Select (software tool needed for 36V)
Rated Charge Current 35A 45A
Nominal PV Power (1a, b) 12V: 500W
24V: 1000W
36V: 1500W
48V: 2000W
12V: 650W
24V: 1300W
36V: 1950W
48V: 2600W
Max. PV Short Circuit Current (2) 40A 50A
Maximum PV Open Circuit Voltage 150V absolute maximum
145V start-up/operating
150V absolute maximum
145V start-up/operating
Maximum Efficiency 98% 98%
Self-Consumption 12V: 20 mA
24V: 15 mA
48V: 10 mA
12V: 20 mA
24V: 15 mA
48V: 10 mA
Charge Voltage 'Absorption' 14.4 / 28.8 / 43.2 / 57.6V (adjustable) 14.4 / 28.8 / 43.2 / 57.6V (adjustable)
Charge Voltage 'Float' 13.8 / 27.6 / 41.4 / 55.2V (adjustable) 13.8 / 27.6 / 41.4 / 55.2V (adjustable)
Charge Algorithm Multi-stage adaptive (8 pre-programmed) Multi-stage adaptive (8 pre-programmed)
Temperature Compensation -16 mV / °C / -32 mV / °C / -64 mV / °C -16 mV / °C / -32 mV / °C / -64 mV / °C
Protection PV reverse polarity / output short circuit / over-temperature PV reverse polarity / output short circuit / over-temperature
Operating Temperature -30 to +60°C (full output up to 40°C) -30 to +60°C (full output up to 40°C)
Humidity 95%, non-condensing 95%, non-condensing
Data Communication Port VE.Direct VE.Direct
Enclosure    
Colour Blue (RAL 5012) Blue (RAL 5012)
Power Terminals 16 mm² / AWG6 16 mm² / AWG6
Protection Category IP43 (electronics), IP22 (connections) IP43 (electronics), IP22 (connections)
Weight 1.25 kg 1.25 kg
Dimensions (h x w x d) 130 x 186 x 70 mm 130 x 186 x 70 mm
Safety Standards EN/IEC 62109-1, UL 1741, CSA C22.2 EN/IEC 62109-1, UL 1741, CSA C22.2