Enhanced Power Solutions for RVs and Caravans
The MultiPlus-II is a versatile inverter/charger tailor-made for the unique energy demands of RV and caravan enthusiasts. The MultiPlus-II seamlessly manages your on-the-road power needs. Its robust design accommodates the flexible power requirements of modern caravans, providing a reliable power source for a wide array of appliances, even while traversing remote off-grid locations. This powerhouse brings unparalleled energy management with a massive 70A mains charger and a 32A AC transfer switch, providing you with continuous and reliable power.
Robust Inverter for All Your Appliances
The heart of the MultiPlus-II is its robust 3000VA / 2400W inverter, equipped with a reliable toroidal transformer capable of delivering a peak power of 5500W. This means you can run virtually any appliance that plugs into a standard 10A power point, from air conditioning units to kitchen appliances, all with the assurance that your power supply can handle the load with ease. Its substantial power output and surge capacity ensure that your travel experience is marked by convenience and reliability, letting you focus on making memories rather than managing energy.
PowerControl and PowerAssist: Optimized Power for Your Journey
Understanding the fluctuating power environment in RVs, the MultiPlus-II ensures that your vehicle's generator or grid connection is never overwhelmed. It intelligently allocates surplus power for charging, and when extra energy is needed, it supplements with battery power, guaranteeing a constant, stable supply.
Uninterrupted Comfort with Seamless Energy Management
The MultiPlus-II stands out during grid failures, maintaining an uninterrupted power supply to your RV's essential systems. With its ultra-fast switching capability, it guarantees that your comfort and convenience are never compromised, allowing you to enjoy all the luxuries of home while on the move.
Efficient Energy Utilization with Dual AC Outputs
Equipped with dual AC outputs, the MultiPlus-II dedicates power to critical systems without draining your storage batteries. Secondary systems, such as water heaters, can be powered only when external AC is available by using AC output 2, preserving battery life for when you need it most.
Expandable Power for Larger Vehicles and Off-Grid Use
For larger RVs requiring more power, the MultiPlus-II can be scaled up. Multiple units can run in parallel, delivering substantial output for all your energy needs. This scalability makes it an ideal solution for extended travel and off-grid living, where power demands can be as unpredictable as your next destination.
Remote System Management for Easy Control
Manage your power system remotely with intuitive monitoring and control solutions. Whether through a dedicated control panel or a smart device, the MultiPlus-II keeps you informed and in control, ensuring your adventures are powered safely and efficiently.
For caravanning enthusiasts who take to the open road, the MultiPlus-II offers the power and flexibility to travel with confidence, providing a reliable energy hub that stands up to the demands of both the journey and the destination.
Victron Energy Limited Warranty Policy
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.
During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.
Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.
Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.
For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Specifications
MultiPlus-II | 24/3000/70-32 |
---|---|
PowerControl & PowerAssist | Yes |
Transfer switch | 32 A |
Maximum AC input current | 32 A |
Inverter | |
DC Input voltage range | 24V: 19 – 33 V |
Output | 230 VAC ± 2% |
Frequency | 50 Hz ± 0.1% |
Cont. output power at 25°C (3) | 3000 VA |
Cont. output power at 25°C | 2400 W |
Cont. output power at 40°C | 2200 W |
Cont. output power at 65°C | 1700 W |
Max apparent feed-in power | 3000 VA |
Peak power | 5500 W |
Maximum efficiency | 24 V: 94 % |
Zero load power | 24 V: 13 W |
Zero load power in AES mode | 24 V: 9 W |
Zero load power in Search mode | 24 V: 3 W |
Charger | |
AC Input voltage range | 187-265 VAC |
Input frequency | 45 – 65 Hz |
Charge voltage 'absorption' | 28.8 (adjustable) |
Charge voltage 'float' | 27.6 (adjustable) |
Storage mode | 26.4 (adjustable) |
Max. battery charge current (4) | 24 V: 70 A |
Battery temperature sensor | Yes |
General | |
Auxiliary output | Yes (32A) |
External AC current sensor (optional) | 50 A or 100 A |
Programmable relay (5) | Yes |
Protection (2) | a-g |
VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
General purpose com. port | Yes (2x) |
Remote on-off | Yes |
Operating temperature range | -40 to +65°C (fan assisted) |
Humidity (non-condensing) | Max 95% |
Enclosure | |
Material & Colour | Steel, blue RAL 5012 |
Protection category | IP22 |
Battery-connection | M8 bolts |
230 V AC-connection | Screw terminals 13 mm² / AWG6 |
Weight | 19 kg |
Dimensions (h x w x d) | 24 V: 499 x 268 x 141 mm |
Standards | |
Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 |
Emission, Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, EN-IEC 61000-6-1, EN-IEC 61000-6-2, EN-IEC 61000-6-3 |
Uninterruptible power supply | Please consult the certificates on our website. |
Anti-islanding | Please consult the certificates on our website. |
- Can be adjusted to 60 Hz
- Protection key:
- a) output short circuit
- b) overload
- c) battery voltage too high
- d) battery voltage too low
- e) temperature too high
- f) 230 VAC on inverter output
- g) input voltage ripple too high
- Non-linear load, crest factor 3:1
- Up to 25°C ambient
- Programmable relay which can be set for:
- General alarm
- DC under voltage
- Genset start/stop function.
- AC rating: 230V / 4A
- DC rating: 4A up to 35VDC and 1A up to 60VDC