Victron 48V 800VA MultiPlus 48/800/9-16 VE.Bus Inverter/Charger: A Versatile Solution for Commercial and Industrial Off-Grid Projects

Multifunctional Power Management with Intelligent Features

The Victron MultiPlus is not just an inverter/charger; it's a comprehensive power management solution designed for high-demand commercial and industrial off-grid applications. This powerful unit integrates a true sine wave inverter, a sophisticated battery charger with adaptive charge technology, and a high-speed AC transfer switch into a single compact enclosure. Its versatility makes it ideal for a range of applications, ensuring reliability and efficiency in energy supply.

Key Features and Benefits:

Parallel Operation and Three-Phase Capability

  • Enhanced Power Output: Up to six MultiPlus units can operate in parallel, delivering increased power for demanding setups.
  • Three-Phase Output: Configure three units for balanced three-phase power, perfect for industrial applications.

PowerControl: Managing Limited Power Sources

  • Smart Load Management: Set maximum generator or shore current to prevent overload, prioritizing charging and essential loads.

PowerAssist: Supplementing Power When Needed

  • Boosting Capacity: Instantly compensates for insufficient shore or generator power, utilizing battery power for peak demands and recharging during low usage periods.

Advanced Charging Technologies

  • Adaptive Charging: Four-stage charging process customizes the charge to battery condition, extending battery life.
  • Dual Bank Charging: Charges a primary battery system and a secondary battery, such as a generator starter battery, simultaneously.

Additional Features for Enhanced Usability

  • High Start-Up Power: Ideal for starting high inrush loads like power tools and lighting.
  • Search Mode: Reduces power consumption by approximately 70% in no-load conditions, increasing efficiency.
  • Programmable Relay & Remote Operations: Customizable settings and remote monitoring/control options for versatile use in remote locations.

Ideal for Applications in Commercial and Industrial Settings

  • Off-grid energy systems in remote commercial and industrial locations.
  • Backup power solutions for critical operations requiring high reliability.
  • Energy management in facilities with fluctuating power demands or limited grid access.

Easy Configuration and Monitoring

  • On-Site and Remote Configurations: Easily adjust settings with DIP switches, VE-Config, or the VE.Bus Smart dongle (not included).
  • Remote Monitoring: Connect to the internet with a Cerbo GX or other GX product (not included) for access to Victron's Remote Management (VRM) platform, allowing for comprehensive monitoring and control.

Enhancing Your Project's Power Solutions with Victron MultiPlus

The Victron 48V MultiPlus Inverter/Charger stands out as a robust, efficient, and versatile power solution for commercial and industrial off-grid applications. Its advanced features and customizable settings ensure optimal performance and reliability, making it an ideal choice for projects requiring dependable power management.

Victron Energy Limited Warranty Policy


Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.


During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.


This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.


Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.


Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.


Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.


As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.


Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.


Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.


Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.


For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specifications

Model MultiPlus 48/800/9
PowerControl / PowerAssist Yes
Three Phase and parallel operation Yes
Transfer switch 16 A
Inverter  
Input voltage range 38– 66 V
Output Output voltage: 230VAC ± 2% Frequency: 50Hz ± 0.1% (1)
Cont. output power at 25°C^{(3)}
Cont. output power at 25°C
800 VA
700 W
Cont. output power at 40°C 650 W
Cont. output power at 65°C 400 W
Peak power 1600 W
Maximum efficiency 94%
Zero-load power 8 W
Zero-load power in search mode 3 W
Charger  
AC Input Input voltage range: 187-265 VAC
Input frequency: 45 – 65 Hz
Charge voltage 'absorption' 57.6 V
Charge voltage 'float' 55.2 V
Storage mode 52.8 V
Charge current house battery^{(4)} 9 A
Battery temperature sensor Yes
General  
Programmable relay Yes
Protection (2) a – g
VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration
(RJ45-spliter ASS030065510 needed)
Remote on-off  
DIP switches Yes^{(6)}
Internal DC fuse 40 A
Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95%
Enclosure  
Common Characteristics Material & Colour: Steel/ABS (blue RAL 5012) Protection category: IP 21
Steel (RAL 5012), IP22
Battery-connection 10 mm²
230V AC-connection G-ST18i connector
Weight 6.4 kg
Dimensions (h x w x d) 360 x 240 x 100 mm
Standards  
Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Emission Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive Directive ECE R10-5
  1. Adjustability

    • Can be adjusted to 60Hz and to 240V.
  2. Protection Features

    • Output short circuit.
    • Overload.
    • Battery voltage too high.
    • Battery voltage too low.
    • Temperature too high.
    • 230VAC on inverter output.
    • Input voltage ripple too high.
  3. Load Capacity

    • Non-linear load, crest factor 3:1.
  4. Operating Environment

    • Up to 25°C ambient temperature.
  5. Programmable Relay

    • Can be set for general alarm, DC under voltage, or generator start/stop signal function.
    • AC rating: 230V/4A.
    • DC rating: 4A up to 35VDC, 1A up to 60VDC.
  6. Control Options

    • Remote control.
    • Battery charge voltage adjustment.
    • Inverter frequency adjustment.
    • Search mode setting.
  7. Battery and Inverter Settings

    • Battery charge voltage adjustment.
    • Search mode setting.