Victron 12V 100Ah Smart LiFePO4 Lithium Battery - High-Efficiency Energy Storage

Important Note - Requires one of these BMS':

  • VE.Bus BMS V2 – recommended for systems with our inverter/chargers such as MultiPluses and Quattros.
  • smallBMS – recommended for use in small systems without intending on using a Victron Inverter/charger.
  • Smart BMS 12/200 – for use in Automotive and Marine systems having DC-loads and Alternators. 
  • Smart BMS CL 12/100 – for use in Automotive and Marine systems having DC-loads and Alternators.
  • Lynx Smart BMS M8 or Lynx Smart BMS M10 – recommended for use in large systems or those wanting the most feature rich and simple solution.

Discover the future of power storage with the Victron 12V 100Ah Smart LiFePO4 Lithium Battery, a leap forward in battery technology for the eco-conscious consumer. Victron Energy, a trusted name in efficient energy solutions, brings you the Lithium Iron Phosphate (LiFePO4) battery range, available in 12.8V and 25.6V across various capacities for diverse applications.

Features:

  • With integrated cell balancing
  • Can be parallel and series connected 
  • Bluetooth app available to monitor cell voltage and temperature

Unparalleled Versatility:

  • Expandable Energy Storage: Connect these batteries in series, parallel, or series/parallel configurations to build a robust battery bank tailored to your system's needs, with options for 12V, 24V, or 48V system voltages.
  • Substantial Capacity: Create an extensive energy reserve with up to 20 batteries in one system, achieving a remarkable 84 kWh storage in a 12V setup and up to 102 kWh in 24V and 48V configurations.

Advanced Chemistry for Demanding Environments:

  • Lithium-Iron-Phosphate Excellence: The LFP battery is designed to withstand demanding conditions without the sulfation issues that plague lead-acid batteries, ensuring longevity and consistent performance.
  • Partial Charge Benefits: Unlike lead-acid batteries, the Victron LFP battery's service life improves with partial charges, making it the superior choice for long-term efficiency and reliability.

Cutting-Edge Efficiency:

  • Superior Round-Trip Energy Efficiency: Enjoy a remarkable 92% energy efficiency with a full discharge and recharge cycle, outperforming the average lead-acid battery's 80% efficiency.
  • Space and Weight Savings: Achieve the same power with 70% less space and weight compared to traditional batteries, a critical advantage for mobile and off-grid applications.

Smart Monitoring with Bluetooth:

  • Real-Time Data: With integrated Bluetooth, monitor cell voltages, temperature, and alarm status directly through the VictronConnect App without needing to physically connect to the battery.
  • Troubleshooting Simplified: Quickly identify and address any potential issues with cell imbalances or other concerns, ensuring your system's optimal performance.

Connects to a Victron Robust Battery Management System (BMS):

  • Proactive Protection: The BMS provides pre-alarms for low voltage and shuts down the load to prevent damage, ensuring your battery's health and safety.
  • Optimized Charging: It also regulates the charging process to protect against overvoltage and temperature extremes, detailed in the comprehensive BMS datasheets.

With the Victron 12V 100Ah Smart LiFePO4 Lithium Battery, power your world with confidence, knowing you have the pinnacle of battery innovation designed for peak performance and longevity. Whether for solar, wind, or mobile applications, this battery delivers the efficiency, durability, and smart technology you need to stay powered up in any situation.

Victron Energy Limited Warranty Policy


Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.


During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.


This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.


Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.


Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.


Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.


As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.


Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.


Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.


Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.


For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specifications

Voltage and Capacity LFP-Smart
12V 100Ah
Nominal voltage 12.8 V
Nominal capacity @ 25°C* 100 Ah
Nominal capacity @ 0°C* 80 Ah
Nominal capacity @ -20°C* 50 Ah
Nominal energy @ 25°C* 1280 Wh
*Discharge current ≤1C  
Cycle Life (capacity ≥ 80 % of nominal)  
80 % DoD 2500 cycles
70 % DoD 3000 cycles
50 % DoD 5000 cycles
Discharge  
Maximum continuous
discharge current
200 A
Recommended continuous
discharge current
≤100 A
End of discharge voltage 11.2 V
Internal resistance 0.8mΩ
Operating Conditions  
Operating temperature Discharge: -20°C to +50°C
Charge: +5°C to +50°C
Storage temperature -45°C to +70°C
Humidity (non-condensing) Max. 95 %
Protection class IP 22
Charge  
Charge voltage Between 14 V and 14.4 V (14.2 V recommended)
Float voltage 13.5 V
Maximum charge current 200 A
Recommended charge
current
≤50 A
Mounting  
Can be placed on their sides Yes^{2)}
Other  
Max storage time @ 25°C^{1)} 1 year
BMS connection Male + female cable with M8 circular connector, length 50cm
Power connection (threaded
inserts)
M8
Dimensions (hxwxd) mm 197 x 321 x 152
Weight 14 kg
^{1)} When fully charged
^{2)} The lithium battery can be mounted upright and on its side, but not with the battery terminals facing down
^{3)} The 12,8V/330Ah lithium battery may only be mounted in an upright position