Solar Panels
Solar Controllers
Batteries
Inverters
Mains Chargers
DC-DC Chargers
Cables & Accessories
Power Converters
Monitoring
Kits
By Brand
Victron 24V 250VA Sun Inverter 24/250-10 IEC Plug+ 10A PWM Solar Charge Controller
250VA Inverter + 10A PWM Solar Charger with Bluetooth & VE.Direct
Victron 24V 5000VA Quattro 24/5000/120-100/100+...DESCRIPTION
Victron 24V 250VA Sun Inverter with Integrated 10A PWM Solar Charge Controller
Compact Off-Grid Power Solution for 24V Systems
The Victron 24V 250VA Sun Inverter combines a pure sine wave inverter and a 10A PWM solar charge controller in a single, space-saving unit. Designed for small-scale off-grid and mobile applications, it delivers reliable 230V AC power from a 24V battery bank while simultaneously managing solar charging. This integrated design simplifies installation and reduces wiring complexity, making it an excellent choice for cabins, workshops, service vehicles, and remote monitoring stations.
With 250VA continuous output and a 400W peak power capability, the inverter handles resistive loads and moderate start-up surges from tools, LED drivers, and small motors. The built-in PWM solar charger supports up to 500W of solar input, keeping batteries topped up during daylight hours. Together, they form a self-contained energy hub that reduces reliance on generators and grid power.
Proven Toroidal Transformer Design
At the core of the inverter is a full bridge with toroidal transformer topology, a design refined over decades of field use. This architecture provides inherent short-circuit protection and robust overload tolerance. It also contributes to the unit's 88% peak efficiency and stable voltage regulation, even under fluctuating DC input conditions. The steel chassis and fan-assisted cooling allow operation in ambient temperatures from -40°C to +60°C, with automatic power derating above 40°C to protect internal components.
Smart Energy Management with ECO Mode
To conserve battery power, the inverter features an adjustable ECO mode. When enabled, the unit enters a low-power standby state if the AC load drops below a preset threshold (minimum 15W). It then pulses on briefly at a configurable interval (default 2.5 seconds) to check for load demand. If a load above the threshold is detected, the inverter resumes normal operation. This reduces zero-load consumption from 5.2W to as low as 1.3W, extending battery runtime in intermittent-use scenarios like weekend cabins or seasonal equipment.
Integrated 10A PWM Solar Charger
The onboard PWM charge controller accepts up to 50V open-circuit voltage and 10A short-circuit current from your solar array. It is compatible with 72-cell panels or two 36-cell panels in series. The charge algorithm is fully programmable via the VictronConnect app, allowing you to tailor absorption and float voltages to your specific battery chemistry. Temperature compensation and a low-temperature cut-off safeguard battery health in extreme climates.
Wireless Monitoring and Configuration
Built-in Bluetooth and a VE.Direct communication port provide flexible options for system oversight. Use the free VictronConnect app on your smartphone or tablet to:
- View real-time inverter load, input/output voltage, and solar yield
- Adjust low-battery cut-off, restart, and alarm thresholds
- Configure dynamic cut-off to prevent premature shutdown under heavy loads
- Set output voltage (210–245V) and frequency (50/60Hz)
- Monitor operational state and fault codes
For remote monitoring, connect the VE.Direct port to a Victron GX device or GlobalLink 520. This enables data logging and alerts via the VRM portal, ideal for unattended installations.
Key Features at a Glance
- 250VA continuous power with 400W peak for motor start-up and tool operation
- Integrated 10A PWM solar charger supports up to 500W of PV input
- Toroidal transformer topology ensures high surge capacity and long-term reliability
- Bluetooth and VE.Direct for local and remote monitoring via VictronConnect
- ECO mode reduces idle consumption to 1.3W for extended battery life
- Wide DC input range (18.4–34.0V) compatible with 24V lead-acid and lithium batteries
- Screw terminals for battery (up to 10mm²) and PV (up to 4mm²) connections, no special tools required
- IEC-320 AC outlet with included male plug for standard appliance connection
- Remote on/off capability via external switch or VE.Direct remote panel (sold separately)
- IP21 rated for indoor use in protected environments
Applications
This inverter-charger combo is well suited to:
- Off-grid cabins and tiny homes needing basic 230V power and solar charging
- Mobile workshops and service vehicles running power tools and battery chargers
- Remote monitoring equipment, security cameras, and telemetry systems
- Backup power for lighting, routers, and small electronics during outages
- Marine and RV auxiliary systems where space and weight are limited
Installation and Safety
The unit features a robust steel chassis with a blue plastic cover (RAL 5012). All DC and PV connections use screw terminals, eliminating the need for specialised crimping tools. The IEC-320 socket accepts the included male plug for a secure AC connection. Built-in protections cover output short circuit, overload, battery over/under voltage, over-temperature, and excessive DC ripple. The inverter meets EN-IEC 60335-1 and EN-IEC 62109-1 safety standards, with EMC compliance to EN 55014-1/2 and IEC 61000-6-1/3.
Power Your Off-Grid Project with Confidence
Whether you're setting up a remote workstation or adding solar to your weekend retreat, the Victron 24V 250VA Sun Inverter delivers dependable AC power and intelligent battery charging in one compact device. Order yours today and take the next step toward energy independence.
SKU: VIC-SIN241251100
SPECIFICATIONS
Specifications
| Model | Sun Inverter 24/250-10 IEC |
|---|---|
| Victron Part Number | SIN241251100 |
| Continuous Power at 25 °C | 250 VA |
| Continuous Power at 25 °C / 40 °C | 200 W / 175 W |
| Peak Power | 400 W |
| AC Output Voltage / Frequency (Adjustable) | 230 Vac +/- 3 %; 50 Hz or 60 Hz +/- 0.1 % |
| DC Input Voltage Range | 18.4 - 34.0 V |
| DC Low Shut Down (Adjustable) | 18.6 V |
| Dynamic (Load Dependent) DC Low Shut Down | Configurable via the dynamic cut-off setting |
| DC Low Restart and Alarm (Adjustable) | 21.8 V |
| Battery Charged Detect (Adjustable) | 28.0 V |
| Max. Efficiency | 88 % |
| Zero-load Power | 5.2 W |
| Default Zero-load Power in ECO Mode | 1.3 W |
| Solar Charger Technology | Pulse Width Modulation (PWM) |
| Maximum PV Voltage / Current / Power | 50 V / 10 A / 500 W |
| Solar Panel Type | 72 cell solar panel or two 36 cell solar panels in series |
| Charge Voltages | Adjustable and able to be temperature compensated |
| Protections | Output short circuit; overload; battery voltage too high; battery voltage too low; temperature too high; DC ripple too high |
| Operating Temperature Range | -40 to +60 °C (fan assisted cooling); output power deration: 1.25 % per °C above 40 °C |
| Humidity (Non-condensing) | Max 95 % |
| Bluetooth Wireless Communication | For remote monitoring and configuration |
| VE.Direct Communication Port | For remote monitoring and system integration |
| Material & Colour | Steel chassis and plastic cover (blue RAL 5012) |
| Battery Connection | Screw terminals, maximum cable cross-section 10 mm² / AWG 8 |
| PV Connection | Screw terminals, maximum cable cross-section 4 mm² / AWG 12 |
| Standard AC Outlet | IEC-320 (male plug included) |
| Protection Category | IP 21 |
| Weight | 2.4 kg / 5.3 lbs |
| Dimensions (H x W x D) | 86 x 165 x 260 mm / 3.4 x 6.5 x 10.2 inch |
| Remote On-Off | Yes |
| Safety | EN-IEC 60335-1 / EN-IEC 62109-1 |
| EMC | EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-3 |
| Automotive Directive | ECE R10-4 EN 50498 |
| SKU: | VIC-SIN241251100 |
| Barcode: | 8719076053705 |
| Model #: | SIN241251100 |
| MPN: | SIN241251100 |
WARRANTY
Victron Energy Limited Warranty Policy
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.
During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like: • Reverse of battery polarity. • Inadequate connection. • Mechanical shock or deformation. • Contact with liquid or oxidation by condensation. • Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...). • Breakage or damage due to lightning. • Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening. • For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.
Life Support Policy As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.
Warranty on Repairs The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.
Transport It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.
For Australia only Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Exotronic provides high-quality products and solutions tailored for B2B and commercial customers, including commercial businesses, caravan manufacturers, marine electricians, OEMs, as well as emergency services, and more.
