website

Victron EV (Electric Vehicle Charger) Charging Station


Notify me when available

You have already submited form for Default Title

Thanks for contacting us. We'll get back to you as soon as product / variant is back in stock.
1

DESCRIPTION

Victron Energy High power EV Charging Station Features

The EV Charging Station has three phase and single-phase capabilities. It delivers maximum 22kW AC in three phase mode or 7.3kW in single phase mode.

Wi-Fi Communication

Wi-Fi: 802.11 b/g/n for configuration and monitoring. The internal Wi-Fi module can be configured in Access Point mode or Station mode for both the initial setup and monitoring.

LCD Touch Screen

It incorporates 4.3-inch LCD Touch Screen for monitoring and control.

Light Ring for fast viewing the device state

Fully programmable RGB Light Ring around charging port, to quickly determine the device state. It can be programmed from the web interface to display different light effects based on the current state (disconnected, charging, charged etc.). The objective is to help the user see the current state from a distance.

Two working modes available:

Manual Mode to configure output current

Manual mode allows configurable output current between 6-32A. The charging power is controlled in two ways: by using the slider on the LCD touch screen or by using its web page. It allows to manually start or stop the charging process when a vehicle is connected to the charging station.

Automatic Mode to ensure maximum PV system efficiency

It detects when excess power is available and uses only that power to charge the vehicle.

Integration with GX devices

The EV Charging Station can be configured and monitored from the GX screen devices and Remote Console.

Integration with VRM

Several options are available in the VRM Portal: real time reports


SKU: VIC-EVC300400300

SPECIFICATIONS

Specifications

Specification Details
Input voltage range (V AC) 170 – 265 VAC
Rated charge current 32 A / phase
Nominal power 22 kW
Current output range 6 – 32 A
WiFi standards 802.11 b/g/n (2.4 GHz only)
Self-consumption 15 mA@230 V
Configurable Max. Current 10-32 A
Configurable Min. Current 6 A up to 1 A below max. value
Connector type IEC 62196 Type 2
GENERAL  
Means to Disconnect External circuit breaker (40 A recommended)
Configurable price/kWh calculator (EUR) Default setting: 0.13 (adjustable)
Control type Web page, GX Device over Modbus TCP, VictronConnect via Bluetooth
Light Ring 55 light configurable light effects available
Protection External RCD is required
Operating temperature -25 °C to +50 °C
Storage temperature -40 °C to +80 °C
Humidity 95 %, non-condensing
Data communication Modbus TCP over WiFi, Bluetooth
ENCLOSURE  
Enclosure colour Light Blue (RAL 5012), Traffic Black (RAL 9017), Traffic White (RAL 9016)
Power terminals 6-10 mm² / AWG 10-8
Protection category IP44
Ventilation Not required
Weight 3 kg
Dimensions (h x w x d) 372 x 292 x 122 mm
STANDARDS  
Safety IEC 61851-1, IEC 61851-22
Detection for Relay Contact welded
Detection for missing protective conductor Yes
Detection for missing Ground Yes
Detection for shorted CP Yes

SKU: VIC-EVC300400300
Barcode: 8719076051305
Model #: EVC300400300
MPN: EVC300400300

WARRANTY

Victron Energy Limited Warranty Policy

Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.

During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like: • Reverse of battery polarity. • Inadequate connection. • Mechanical shock or deformation. • Contact with liquid or oxidation by condensation. • Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...). • Breakage or damage due to lightning. • Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening. • For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.

This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.

Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.

Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.

Life Support Policy As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.

As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.

Warranty on Repairs The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.

Transport It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.

Severability If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.

For Australia only Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Exotronic provides high-quality products and solutions tailored for B2B and commercial customers, including commercial businesses, caravan manufacturers, marine electricians, OEMs, as well as emergency services, and more.

Register Here

RECENTLY VIEWED PRODUCTS

Loading...

What are you looking for?