Victron Lynx Power In – Lynx Shunt – Lynx Distributor Bundle (M8)

The Lynx Distribution Bundle is a modular DC power distribution system designed for connecting batteries and DC equipment, while also providing fusing and battery monitoring for your electrical setup. It includes the following modules:

  • Lynx Power In
  • Lynx Power In Bolt Kit (allows MEGA fuses to be used in Power In)
  • Lynx Shunt
  • Lynx Distributor

Lynx Distribution System: Modular Power Management

The Lynx Distribution System is a top-tier solution for modular power management. It integrates DC connections, distribution, fusing, battery monitoring, and lithium battery management into a single, unified unit. Designed for those aiming to enhance their power setup, it’s ideal for a range of applications—from marine installations to off-grid energy systems.

Optimize Your Power Setup Today with the Lynx Distribution System!

Victron Energy Limited Warranty Policy


Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.


During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.


This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.


Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.


Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.


Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.


As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.


Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.


Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.


Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.


For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specifications

Lynx Power In (M8)

Power  
Voltage range 9 - 60Vdc
Current rating 1000Adc 1000Adc continuous
Physical  
Enclosure material ABS
Enclosure dimensions (hxwxd) 290 x 170 x 80mm
Unit weight 2.1kg
Busbar material Tinned copper
Busbar dimensions (hxw) 8 x 30mm
Environmental  
Operating temperature range -40°C to +60°
Storage temperature range -40°C to +60°
Humidity Max. 95% (non-condensing)
Protection class IP22

Lynx Distributor (M8)

Feature Description
Power Voltage Range 9 - 60Vdc
Supported System Voltages 12, 24, or 48V
Reverse Polarity Protection Yes (Note 1)
Current Rating 1000Adc continuous
Power Consumption Max 100mA (with all LEDs illuminated) (Note 2)
Connections Busbar M8, Fuses M8
Cables 40 cm RJ10 cable (included) (Note 3 and 4)
Enclosure Material ABS
Enclosure Dimensions 290 x 170 x 80 mm
Unit Weight 2.2 kg
Busbar Material Tinned copper
Busbar Dimensions 8 x 30mm
Operating Temperature Range -40°C to +60°C
Storage Temperature Range -40°C to +60°C
Humidity Max. 95% (non-condensing)
Protection Class IP22

Lynx Shunt (M8)

Power Supply  
Voltage Range 9 - 70 Vdc
Supported System Voltages 12, 24, or 48V
Reverse Polarity Protection No
Current Rating  
Continuous 1000Adc
Power Consumption  
At 12V 60mA
At 24V 33mA
At 48V 20mA
Potential Free Alarm Contact 3A, 30Vdc, 250Vac
Connections  
Busbar M8
Fuse M8
VE.Can RJ45 and RJ45 terminator
Power Supply Connection to Lynx Distributor RJ10 (a RJ10 cable ships with each Lynx Distributor)
Temperature Sensor Screw terminal
Relay Screw terminal
Physical Attributes  
Enclosure Material ABS
Dimensions (h x w x d) 190 x 180 x 80 mm
Unit Weight 1.4 kg
Busbar Material Tinned copper
Busbar Dimensions (hxw) 8 x 30 mm
Environmental Conditions  
Operating Temperature Range -40°C to +60°C
Storage Temperature Range -40°C to +60°C
Humidity Max. 95% (non-condensing)
Protection Class IP22