Victron Clamp Connector (w/ 30A ATO fuse) (Suits IP65 Battery Charger)
Integrated 30A ATO Fuse & Quick-Connect Plug for IP65 Chargers
DESCRIPTION
Victron Clamp Connector: Reliable Battery Clamp Accessory for Blue Smart IP65 Chargers
Purpose-Built Connection for Victron IP65 Chargers
The Victron Clamp Connector is a dedicated accessory engineered to provide a secure, temporary battery connection for the Blue Smart IP65 Charger range. Designed for workshops, service vehicles, and field maintenance, this assembly allows quick attachment to battery terminals without permanent installation, making it ideal for charging, diagnostics, or maintenance across multiple vehicles or battery banks.
Unlike generic alligator clips, this connector integrates a 30 A ATO blade fuse within an inline holder, offering essential overcurrent protection directly at the connection point. The spring-loaded clamps feature insulated grips and strong jaw tension, ensuring reliable contact on standard automotive and marine battery posts while reducing the risk of accidental short circuits during handling.
Integrated Safety with Inline Fuse Protection
A key differentiator of this accessory is the factory-fitted 30 A ATO fuse. In the event of a reverse polarity connection, charger fault, or unexpected current surge, the fuse acts as a first line of defence, protecting both the charger and the battery. The fuse holder is easily accessible for inspection or replacement, and the use of a standard ATO format means spare fuses are widely available.
This design reduces the risk of damage to sensitive electronics and wiring, a common concern when using unfused clamp adapters. For technicians and enthusiasts who prioritise equipment longevity, this integrated protection is a practical advantage.
Quick-Connect Convenience for Mobile Charging
The connector features a proprietary snap-on plug that mates directly with the output port of compatible Blue Smart IP65 chargers. This tool-free interface allows users to switch between clamp, eyelet, or other Victron accessories in seconds, streamlining workflow when moving between vehicles or battery types. The flexible, colour-coded cabling (red for positive, black for negative) simplifies identification and reduces setup errors.
With a generous cable length, the clamp connector provides ample reach from charger to battery, even in engine bays or confined compartments. A cable management tie is included to keep the leads organised during storage.
Key Features
- Integrated 30 A ATO fuse for overcurrent and reverse polarity protection
- Insulated spring clamps with strong grip for secure battery post connection
- Quick-connect plug compatible with Blue Smart IP65 chargers
- Flexible, colour-coded cabling for easy polarity identification
- Tool-free accessory change — swap between clamp and eyelet connectors in seconds
- Compact and portable design for mobile technicians and workshop use
Typical applications include:
- Charging and maintaining starter, deep-cycle, and auxiliary batteries in cars, trucks, boats, and caravans
- Workshop battery testing and diagnostics where a temporary connection is required
- Seasonal battery maintenance for motorcycles, lawn tractors, and recreational vehicles
- Field service calls where a portable, fused charging solution is essential
Built to Victron Quality Standards
As a genuine Victron Energy accessory, this clamp connector is manufactured to the same rigorous standards as the chargers it supports. The materials are selected for durability in workshop and field environments, with robust insulation and corrosion-resistant terminals. While not intended for permanent outdoor installation, the assembly withstands typical handling and occasional exposure to moisture when used with care.
Enhance Your Charging Setup Today
Equip your Blue Smart IP65 charger with the Victron Clamp Connector for a safer, more efficient battery charging experience. Whether you're a professional technician or a dedicated DIY enthusiast, this accessory delivers the convenience and protection needed for reliable mobile power management. Add it to your toolkit now and ensure you're always ready for the next job.
SKU: VIC-BPC900400014
SPECIFICATIONS
Specifications
| Product Name | Clamp Connector |
|---|---|
| Part Number | BPC900400014 |
| Battery Connection | Spring Clamps with Inline ATO Fuse |
| Included Fuse | 30 A ATO Fuse Included |
| Compatible Chargers | Blue Smart IP65 Chargers |
| SKU: | VIC-BPC900400014 |
| Barcode: | 8719076040156 |
| Model #: | BPC900400014 |
| MPN: | BPC900400014 |
WARRANTY
Victron Energy Limited Warranty Policy
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.
During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like: • Reverse of battery polarity. • Inadequate connection. • Mechanical shock or deformation. • Contact with liquid or oxidation by condensation. • Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...). • Breakage or damage due to lightning. • Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening. • For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.
Life Support Policy As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.
Warranty on Repairs The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.
Transport It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.
For Australia only Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Exotronic provides high-quality products and solutions tailored for B2B and commercial customers, including commercial businesses, caravan manufacturers, marine electricians, OEMs, as well as emergency services, and more.



