Noosa 50 Series Pre-Wired Victron Energy Power Board: Perfect for Lithium Upgrades & Charging System Enhancements

The Noosa 50 Series Pre-Wired Victron Energy Power Board is your go-to solution for upgrading your van, RV, or off-grid setup’s charging system. Specifically designed for those transitioning to lithium batteries, this power board simplifies your energy system, ensuring faster, more efficient charging with premium Victron Energy components. Whether you're a professional installer or a DIY enthusiast, this pre-wired board takes the hassle out of installing complex electrical systems, giving you a reliable, professional-grade upgrade in no time.

Optimized Power Solution for Lithium Battery Users

Upgrading to lithium batteries or seeking a more efficient power system? The Noosa 50 Series is tailored for you. It’s pre-wired with Victron's most trusted components to ensure smooth, fast charging and battery life optimization, all in a compact, easy-to-install package.

Key Features of the Noosa 50 Series:

  • Victron 50A Orion XS DC-DC Charger
    Designed to handle the unique demands of lithium batteries, the Orion XS charger extends battery life through its Adaptive Three-Step Charging technology and intelligent recovery function. Bluetooth capability allows you to remotely monitor your system.

  • Victron 50A MPPT SmartSolar Controller
    Maximize the efficiency of your solar panels with this smart controller. Equipped with Bluetooth and the VictronConnect app, you can easily track solar power generation in real time.

  • Victron Blue Smart IP22 12/30 Mains Charger
    This advanced mains charger rapidly restores battery power with its three-step charging process, ensuring your batteries are always performing at their best.

Expertly Pre-Wired for a Hassle-Free Installation

With the Noosa 50 Series, we’ve taken the stress out of wiring. This board is expertly pre-wired and ready for immediate installation, cutting down on setup time and eliminating guesswork. Each component is professionally connected to ensure the most efficient energy management system possible. Plus, a detailed wiring diagram is included to guide you through any additional setup steps, making installation easier than ever.

Ideal for Van Conversions, RVs, and Off-Grid Living

Whether you're building a van conversion, upgrading your RV, or enhancing your off-grid home’s power system, the Noosa 50 Series is the perfect solution. Its compact, space-saving design makes it easy to mount under seats or beds, making the most of your limited space without sacrificing power performance.

Easy Connections

  • 120A Grey Anderson: Output to your house battery.
  • 50A Grey Anderson: Input from your starter battery.
  • 50A Blue Anderson: Input from your solar array, includes a 50A Noark PV Isolation switch for meeting safety standards.
  • 240V AC Plug: Input from 230V mains.
  • Genuine Anderson connectors (1x 120A Grey, 1x 50A Grey, 1x 50A Blue) included.

Key Applications:

  • Van Conversions
  • RVs and Caravans
  • Marine Applications

Why Choose the Noosa 50 Series for Your Charging Needs?

  • Professional-grade components: Only the best from Victron Energy.
  • Hassle-free installation: Pre-wired for your convenience.
  • Optimized for lithium: Perfect for users upgrading to lithium batteries.
  • Compact design: Fits easily into small spaces, such as under a van bed or seat.

Take Control of Your Energy System Today!

Upgrade your van, RV, or off-grid setup with the Noosa 50 Series Pre-Wired Victron Energy Power Board for efficient, reliable energy management. Don't settle for a subpar charging system—choose a solution that’s professionally built to last. Order yours today and enjoy the freedom of reliable power, no matter where your adventures take you!

Victron Energy Limited Warranty Policy


Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.


During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.


This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.


Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.


Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.


Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.


As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.


Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.


Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.


Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.


For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Specifications

Board DC Input Voltage

10 – 17V

Acceptable Battery Type

Lithium and Lead Acid Batteries

Minimum Battery Capacity and Current

100Ah

100A Continuous Current

Permitted Simultaneous Power Sources

Solar + Mains OR

Solar + DC-DC

System Zero Load Power

3W

Mains Charger AC Input Voltage Range

187 – 265VAC     45- 65Hz

Maximum Charge Current - Mains

30A

Maximum Charge Current - Solar

50A

Maximum Charge Current - DC-DC

50A

Maximum Total Charge Current

100A

Output Absorption Voltage

14.2V - Adjustable

Output Float Voltage

13.5V - Adjustable

Solar Maximum Voltage

100V

Solar Array Size

0 – 1200W

(600-800W recommended)

Solar Maximum Short Circuit Current

60A

Board Temperature Rating

5C – 50C

(0C – 65C storage)

Board Portrait Dimensions

390 x 315 x 95mm

Board Weight

5.7kg