website

Victron Wall Mount (Suits IP65 Battery Charger 12/25 & 24/13)

Three-point mounting for stable, vibration-free charger storage


Notify me when available

You have already submited form for Default Title

Thanks for contacting us. We'll get back to you as soon as product / variant is back in stock.
4

DESCRIPTION

Secure Your Victron Blue Smart IP65 Charger with a Purpose-Built Wall Mount

Keep Your Charger Accessible and Organised

The Victron Wall Mount is engineered to hold your Blue Smart IP65 12/25 or 24/13 battery charger securely in place, transforming it into a fixed charging station. Ideal for workshops, garages, or service vehicles, this bracket ensures your charger is always within reach without cluttering your workspace. By mounting the charger on a wall or bench, you eliminate the risk of accidental drops, cable strain, or damage from being left on the floor.

Designed specifically for the Victron Blue Smart IP65 charger, this mount provides a precise fit that holds the unit firmly while allowing quick removal when needed. The open-frame design promotes airflow around the charger, helping to maintain optimal operating temperatures during extended charging cycles.

Stable Three-Point Mounting System

Unlike generic brackets that may wobble or loosen over time, this Victron mount uses a three-point screw fixing system. Two upper tabs and one lower tab distribute the charger’s weight evenly, preventing vibration and movement even in mobile environments such as service trucks or caravans. The pre-drilled holes accept standard fasteners, making installation straightforward on timber, plasterboard (with appropriate anchors), or metal surfaces.

Durable Construction for Long-Term Use

Moulded from UV-stabilised, impact-resistant polymer, the wall mount withstands harsh workshop conditions, temperature fluctuations, and exposure to sunlight without becoming brittle. The material resists common automotive chemicals, oils, and mild acids, ensuring the bracket remains functional and presentable over years of service.

Designed for Convenience

The mount’s retention clips grip the charger’s casing securely, yet allow the charger to be slid out effortlessly when portable use is required. The open centre section provides unobstructed access to the charger’s DC output cable and AC input, simplifying cable routing and reducing clutter. Status LEDs remain fully visible, so you can monitor charging progress at a glance without removing the unit.

  • Custom-fit for Victron Blue Smart IP65 12/25 and 24/13 chargers
  • Three-point mounting for superior stability on walls or benches
  • UV-stabilised, chemical-resistant polymer construction
  • Open design enhances ventilation and cable management
  • Quick-release retention clips for easy charger removal
  • Maintains clear visibility of charger status indicators

Professional-Grade Organisation

In professional settings, a tidy workspace improves efficiency and safety. This wall mount helps you establish a dedicated charging area, reducing trip hazards from loose cables and preventing the charger from being misplaced. For mobile technicians, it ensures the charger stays put during transit, ready for immediate use upon arrival.

Whether you maintain a fleet of vehicles, service marine batteries, or simply want a neat home garage setup, the Victron Wall Mount adds a layer of professionalism and practicality to your charging routine.

Simple Installation

Mounting requires only basic tools and three suitable fasteners (not included). The bracket can be oriented vertically or horizontally to suit your space. Once installed, the charger slides in from the top and clicks into place—no additional straps or clamps needed.

Note: Wall mount only; charger and fasteners not included.

Upgrade Your Charging Setup Today

Add the Victron Wall Mount to your order and create a permanent, reliable charging station that keeps your Blue Smart IP65 charger secure, accessible, and ready for action.


SKU: VIC-BPC920100210

SPECIFICATIONS

Specifications

ManufacturerVictron Energy
ProductWall Mount for Blue Smart IP65 Charger
Part NumberBPC920100210
Suitable ForBlue Smart IP65 Charger 12/25, 24/13
Compatible Charger Dimensions (H x W x D)75 x 140 x 240 mm
Compatible Charger Article NumbersBPC122531064, BPC122531034, BPC122531124, BPC241331064, BPC241331034, BPC241331124

SKU: VIC-BPC920100210
Barcode: 8719076056683
Model #: BPC920100210
MPN: BPC920100210

WARRANTY

Victron Energy Limited Warranty Policy





Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.





During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:

• Reverse of battery polarity.

• Inadequate connection.

• Mechanical shock or deformation.

• Contact with liquid or oxidation by condensation.

• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).

• Breakage or damage due to lightning.

• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.

• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.





This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.





Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.





Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.





Life Support Policy

As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.





As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.





Warranty on Repairs

The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.





Transport

It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.





Severability

If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.





For Australia only

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.


Exotronic provides high-quality products and solutions tailored for B2B and commercial customers, including commercial businesses, caravan manufacturers, marine electricians, OEMs, as well as emergency services, and more.

Register Here

RECENTLY VIEWED PRODUCTS

Loading...

What are you looking for?

Shipping Calculator