Victron Mains 2m Cord AU/NZ (Smart IP43/ Skylla-S Battery Charger)
2m Length, AU/NZ 3-Pin Plug, Locking IEC C14 Connector
Victron Rubber Bumper (Suits IP65 Battery Charg...DESCRIPTION
Victron Mains Cord AU/NZ for Smart IP43 and Skylla-S Battery Chargers
Reliable AC Power Connection for Victron Chargers
Ensure a secure and stable mains connection for your Victron Smart IP43 or Skylla-S battery charger with this genuine 2-metre power cord. Designed specifically for Australian and New Zealand installations, it features an AS/NZS 3112 compliant 3-pin plug and a locking IEC 320 C14 connector that prevents accidental disconnection during operation.
Using a manufacturer-approved cord reduces the risk of poor contact, voltage drop, and overheating that can occur with generic alternatives. The integrated retainer clip on the charger inlet keeps the connection firm, even in mobile or high-vibration environments such as caravans, marine vessels, and off-grid power systems.
Key Features
- Genuine Victron accessory for Smart IP43 and Skylla-S chargers
- 2-metre length offers practical reach without excess cable clutter
- AS/NZS 3112 plug meets Australian and New Zealand electrical standards
- IEC 320 C14 connector with retainer clip for a secure, locked connection
- Durable black jacket suitable for indoor and protected outdoor use
Engineered for Compatibility and Safety
This cord is purpose-built for Victron's Smart IP43 series and Skylla-S chargers, ensuring correct pin alignment and reliable current delivery. Unlike universal cords, it matches the charger's inlet specifications precisely, supporting consistent performance and reducing the likelihood of electrical faults.
In installations where chargers are mounted in confined spaces or subject to movement, the locking connector provides peace of mind that the AC supply remains uninterrupted. This is particularly important for critical charging applications such as battery maintenance in remote sites, emergency backup systems, and professional workshops.
Installation and Use
Simply connect the IEC C14 end to your charger's AC inlet until the retainer clip engages, then plug the 3-pin AU/NZ plug into a standard mains socket. The 2-metre length allows flexible placement of the charger relative to the power point, while the robust construction withstands regular handling.
For optimal safety, ensure the cord is routed away from heat sources, sharp edges, and moisture. This cord is intended for use with Victron chargers that have a corresponding IEC 320 C14 inlet with retainer clip; verify your charger model before purchase.
Why Choose a Genuine Victron Cord?
Third-party cords may not provide the same level of electrical integrity or mechanical fit. A loose connection can lead to intermittent charging, increased resistance, and potential damage to the charger's AC input. By selecting this Victron cord, you maintain the reliability and longevity of your charging system.
Whether you're replacing a lost cord or keeping a spare on hand, this accessory ensures your Victron charger is always ready for operation.
Power Your Charger with Confidence
Add the genuine Victron 2-metre mains cord to your setup today and maintain a dependable AC connection for your Smart IP43 or Skylla-S charger. A small component that makes a significant difference in system reliability.
SKU: VIC-ADA010100300
SPECIFICATIONS
Specifications
| Product Name | Mains Cord AU/NZ for Smart IP43 2 m |
|---|---|
| Article Number | ADA010100300 |
| Length | 2 m |
| Plug Option | Australia/New Zealand: AS/NZS 3112 |
| Compatible Product | Smart IP43 |
| Charger AC Connection | IEC 320 C14 inlet with retainer clip (AC cord ordered separately) |
| SKU: | VIC-ADA010100300 |
| Barcode: | 8719076045106 |
| Model #: | ADA010100300 |
| MPN: | ADA010100300 |
WARRANTY
Victron Energy Limited Warranty Policy
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.
During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like: • Reverse of battery polarity. • Inadequate connection. • Mechanical shock or deformation. • Contact with liquid or oxidation by condensation. • Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...). • Breakage or damage due to lightning. • Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening. • For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.
Life Support Policy As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.
Warranty on Repairs The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.
Transport It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.
For Australia only Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Exotronic provides high-quality products and solutions tailored for B2B and commercial customers, including commercial businesses, caravan manufacturers, marine electricians, OEMs, as well as emergency services, and more.




